{"title":"CP42 Wheels","description":"\u003ch2\u003eCircuit CP42: The Legend, Remastered.\u003c\/h2\u003e\n\u003cp\u003eYou want the Holy Grail look: the legendary Type R aesthetic - but you don't want to swap your hubs or pay collector prices for scratched-up 15x6s. We get it. That’s why we built the \u003cstrong\u003eCircuit CP42\u003c\/strong\u003e. This is a tribute to the wheel that defined the 90s Golden Era of Honda tuning, but we didn't just clone it; we fixed the fitment.\u003c\/p\u003e\n\u003cp\u003eThe original OEM wheels were tucked in way too far (15x6 +50mm? No thanks). Our \"OEM+\" approach bumps this up to a proper 15x7 with a +35 offset. That means you get the classic 7-spoke vibe you grew up worshiping, but it actually sits flush on your Civic or Integra. In 2024, we dialed it in even further with a new flush, paint-matched center cap to perfectly mimic that smooth factory look. It’s the period-correct aesthetic your build deserves, with the modern stance you actually need.\u003c\/p\u003e\n\u003ch3\u003eThe Firm Facts:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe \"God Spec\":\u003c\/strong\u003e We ditched the anemic factory specs for a 15x7 +35 setup. This is the perfect fitment for just about any 4x100 Honda - no spacers needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal Champ White:\u003c\/strong\u003e This isn't appliance white. We use a true Gloss Championship White with that subtle cream undertone that matches the heritage of the 1965 RA272 and the 90s Type R lineage. Also available in Gloss Gunmetal, similar to the OEM option available from dealerships in the 90s.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe v2 Cap Update:\u003c\/strong\u003e Now features a completely flat, paint-matched center cap. Note: Our lawyers won't let us sell you the Red \"H\" logos, but a simple vinyl overlay makes these look 100% factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-Lug Hero:\u003c\/strong\u003e Single drilled \u003cstrong\u003e4x100\u003c\/strong\u003e fitment. This is the look you want without the headache of a 5-lug conversion. A \u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e5x114.3 PCD\u003c\/strong\u003e fitment is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Ready:\u003c\/strong\u003e Bored to 73.1mm to fit anything. Just grab some hub rings, toss on your tuner lugs (60-degree conical), and enjoy the nostalgia.\u003c\/p\u003e","products":[{"product_id":"cp42-gloss-gunmetal","title":"Circuit CP42 Gloss Gunmetal","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eELEVATE YOUR VEHICLE’S LOOK:\u003c\/strong\u003e  Circuit CP42 is inspired by the USDM ITR Integra Type R and JDM EK9 CTR Wheel, an iconic 90s wheel design that will instantly upgrade the look of almost any 4x100 or 5x114.3 Honda or Acura.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIT BETTER:\u003c\/strong\u003e OEM+ Fitment, refined to have a wider, lower offet for modern fitment with an OG look. The best of both worlds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIMPLE TO INSTALL:\u003c\/strong\u003e With a set of Circuit hub rings, \u003cmeta charset=\"utf-8\"\u003eCP42 wheels become hub centric on any vehicle for direct, easy bolt-on fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE:\u003c\/strong\u003e Constructed of low-pressure cast A356 Aluminum with T6 heat treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFINISH: \u003c\/strong\u003eCircuit CP42 are offered in Championship White, or Gloss Gunmetal, just like the originals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBUILT FOR LIFE:\u003c\/strong\u003e All Circuit® wheels are backed by our unmatched lifetime structural warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Circuit","offers":[{"title":"4x100 \/ 15x7 | +35mm\/5.38\" (v2)","offer_id":47859489308961,"sku":"CP42C570GM-35","price":169.99,"currency_code":"USD","in_stock":true},{"title":"5x114.3 \/ 15x7 | +35mm\/5.38\" (v2)","offer_id":50752890765601,"sku":"CP42J570GM-35","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3453\/1105\/files\/cp42c570gm-35_circuit-cp42-15x7-gun-metal-4x100-35_01.jpg?v=1736194738"},{"product_id":"cp42-gloss-white","title":"Circuit CP42 Gloss White","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eELEVATE YOUR VEHICLE’S LOOK:\u003c\/strong\u003e  Circuit CP42 is inspired by the USDM ITR Integra Type R and JDM EK9 CTR Wheel, an iconic 90s wheel design that will instantly upgrade the look of almost any 4x100 or 5x114.3 Honda or Acura.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFIT BETTER:\u003c\/strong\u003e OEM+ Fitment, refined to have a wider, lower offet for modern fitment with an OG look. The best of both worlds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIMPLE TO INSTALL:\u003c\/strong\u003e With a set of Circuit hub rings, \u003cmeta charset=\"utf-8\"\u003eCP42 wheels become hub centric on any vehicle for direct, easy bolt-on fitment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE:\u003c\/strong\u003e Constructed of low-pressure cast A356 Aluminum with T6 heat treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFINISH: \u003c\/strong\u003eCircuit CP42 are offered in Championship White, or Gloss Gunmetal, just like the originals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBUILT FOR LIFE:\u003c\/strong\u003e All Circuit® wheels are backed by our unmatched lifetime structural warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a Circuit CP42 Wheel. It’s got a 15 inch diameter, 7 inch width, and comes in either a 4×100 or 5x114.3 bolt pattern, with an offset of +35mm. This updated v2 was re-introduced in 2024 with a new OEM style paint matched flat center cap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspired by the USDM ITR Integra Type R and JDM EK9 CTR Wheel\u003c\/li\u003e\n\u003cli\u003eOEM + Fitment, with slight refinements and adjustments\u003c\/li\u003e\n\u003cli\u003eCompatible with all 0.453″ valve stems and TPMS sensors\u003c\/li\u003e\n\u003cli\u003eLug seating for tuner style lug nuts, with a 60 degree conical base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Circuit CP42 is a tribute to one of the most iconic wheel designs of the 90s. This new release captures the unmistakable style that defined an era, blending nostalgia with modern styling. Designed for the true enthusiasts who grew up admiring this cult classic, the CP42 offers a fresh take on a timeless design.\u003c\/p\u003e\n\u003cp\u003eOur OEM Plus approach takes the classic look of original wheel and refines it with modest adjustments to fitment for an improved stance and improved aesthetics. The original JDM CTR\/USDM ITR wheel was offered in 15×6, with a really high +50mm offset. We added an inch of width and lowered the offset to +35mm for a slightly more modern flusher fit. By retaining the original wheel profile, with a slightly wider and lower offset fitment, we’ve created a wheel that looks right at home on your car while standing out in all the right ways. Perfect for those who value heritage, authenticity and performance.\u003c\/p\u003e\n\u003cp\u003eThis wheel is single-drilled to either 4x100 or 5x114.3. It’s 15×7 which means it has a 15″ diameter and a 7″ width. The offset is +35mm which means the mounting pad is 35mm forward of the centerline of the wheel. The centerbore in the back of the wheel is 73.1mm, so it can easily be \u003cem\u003ehub centric\u003c\/em\u003e to any vehicle by using a hub centric ring during installation. It’s a great fit on a wide range of Honda And Acura vehicles including Integra, Civic, Fit, and Insight.\u003c\/p\u003e\n\u003cp\u003eThis wheel features a gloss championship white finish that has a high gloss clear coat. It’s subtle, sporty and classy. It strikes a perfect balance between modern elegance and retro charm.\u003c\/p\u003e\n\u003cp\u003eThe v2 CP42 wheel includes a paint matched flush mount blank center cap that can easily be customized. Many of our customers choose to overlay an emblem or logo with vinyl to complete the OEM look. The iconic “H” or “A” emblems are trademarks of Honda\/Acura so we are unable to provide these, but a deep red vinyl overlay can easily be applied.\u003c\/p\u003e","brand":"Circuit","offers":[{"title":"4x100 \/ 15x7 | +35mm\/5.38\" (v2)","offer_id":50759861633313,"sku":"CP42C570WH-35","price":169.99,"currency_code":"USD","in_stock":true},{"title":"5x114.3 \/ 15x7 | +35mm\/5.38\" (v2)","offer_id":50759861666081,"sku":"CP42J570WH-35","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3453\/1105\/files\/cp42c570wh-35_circuit-cp42-15x7-championship-white-4x100-35_01.jpg?v=1736195382"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3453\/1105\/collections\/cp42c570wh-35_circuit-cp42-15x7-championship-white-4x100-35_01.jpg?v=1739410735","url":"https:\/\/circuit-performance-9992.myshopify.com\/collections\/cp42-usdm-type-r-style-wheels.oembed","provider":"Circuit Performance","version":"1.0","type":"link"}